IRIS Solutions - Installers

IRIS Touch 600 Specifications

SPECIFICATIONS IRIS Touch 600 IRIS Touch 620 IRIS Touch 640
640Polling (monitoring of connection) & alarm transmission via Ethernet  
Polling (monitoring of connection) & alarm transmission via GPRS  
CONTROL PANEL INTERFACES
Direct serial (bus) connection Honeywell Galaxy Classic,G2,G3 and dimension (V4.00 and above) via RS485
  Texecom Premier Series (V7.6 and above) via RS232
  Texecom International Series (V15.x and above via RS232)
  Cooper Scantronic I-ON Series (with optional CT Interface board via RS232)
ETHERNET INTERFACE (IRIS Touch 620 and IRIS Touch 640)
10 Mbps and 100 Mbps (10/100 Base T) with auto-negotition
Standard RJ45 connector for CAT-5 cable
Allows for the use of fixed IP address or DHCP
GPRS/GSM INTERFACE (IRIS Touch 600 and IRIS Touch 640)
Quad band GSM 850/900/1800/1900 MHz
SMA antenna connection
IP (TCP) OUTBOUND ONLY
Polling & Alarms TCP 53165
Upload/Download (Remote Service App) TCP 10001
IRIS Touch 600 Series diagnostic & firmware upgrade TCP 51292
4 PIN INPUTS
Maximum input voltage range 0V to +24V
Input ‘low’ threshold < 1V
Input ‘high’ threshold > 2V
Input pull-up impedance Internal 10K to 5V supply
2 RELAY OUTPUTS
Maximum operating voltage 24V
Maximum current rating 100mA
POWER SUPPLY IRIS Touch 600 IRIS Touch 620 IRIS Touch 640
Supply voltage 9-30V DC
Typical current consumption 130mA 145mA 185mA
Note: These figures are based upon Ethernet being connected. With GSM/GPRS there will also be additional transient peak current of up to 250mA as GSM and GPRS transmissions (e.g. For network registration and calls) are made.
WEIGHTS & DIMENSIONS
IRIS Touch 600 Series PCB dimensions 120 x 90 mm
IRIS Touch 600 Series PCB weight 60 grams
IRIS Touch 600 Series fully packaged weight 160 grams

 

Comprehensive brochure Technical details